Beko RS 8034 HM, User Manual

Page: 83 / 215

83 / EN
Robot Vacuum / User’s Manual for Mobile App
•
Your robot should only be used indoors.
•
Do not step on or stand on this device.
•
Small children and pets should always be under surveillance while the robot operates.
•
Pick up clothes and paper items before using the device; remove the ropes of blinds and curtains, electrical cables
and fragile objects from the floor. When passing over an electrical cable, the device may pull the cable, thus an
object on the table or shelf may fall, or the device may malfunction as its brush is blocked and it can not rotate
on the base of the robot.
•
If the room to be cleaned has a balcony and its door is open, the device should be operated in a safe environment
by placing a physical obstacle in front of the balcony door to prevent the device from accessing the balcony.
•
Place the robot and charging dock as close to the WiFi® signal emitter as possible: Doing so allows
the Robot to receive information via the mobile application. Otherwise, you may have difficulties in
controlling it via the mobile application.
•
Observe the robot vacuum cleaner during the first time cleaning in a new environment or when the furniture has
been relocated in your home. This way, you can learn about problematic obstacles, remove them, or limit this area
with magnetic tape or physical obstacles.
•
The robot vacuum is 105 millimeters (10.5 cm) high. Objects should be at least 115 millimeters (11.5 cm) above
the floor for the robot vacuum to creep underneath them. There may be a possibility that the robot creeps under
objects of same height and gets stuck. To prevent such situations, a physical barrier should be placed in front of
the items concerned or a boundary should be drawn with the magnetic strip that comes in the box of the product.
•
When a mop attachment is attached to the robot, its height increases. It is recommended to designate areas that
are too low for it to enter as no-go areas on the map. Otherwise the product will jam and give an error.
•
The controller should be pointed towards the product and used from a distance of 1.5-2 meters. The
button configuration of the controller is explained in detail in the product user manual.
Place the charging station in a clutter-free area, on a flat surface and with no gaps between
it and the wall.
If you place the station in a narrow space or in an area without a straight wall behind it, the
vacuum cleaner may not be able to communicate with the charging dock. In addition, when
the command to start cleaning is given, the device must be at the charging dock and start
from there. If not initialized from the charging dock, it may cause small displacements in
the station position as the product settles into the station when you send it to charge again.
HOME
THINGS TO KNOW BEFORE USE