Beko RS 8034 HM, User Manual, Page: 90 / 215

90 / EN
Robot Vacuum / User’s Manual for Mobile App
12. The function buttons at the bottom of the main screen and their explanations are listed below.
Map Settings:
This is the section where you can save and edit the map, edit the room section, define
a restricted area, rotate and delete the map view.
Cleaning Settings:
This is the section where you can adjust the cleaning mode and mop wetness level.
Recharge:
It sends the device to the charging dock.
Start: Activates the device to initiate cleaning.
13. With the start of the first cleaning process of the device, the map of your house on the screen will
start to be formed. While the device is charging in the charging dock, press the 'Start' button. Make
sure the battery is fully charged before starting up. The device will start roaming to create the entire
map. Make sure the doors to all rooms are open.
C
During cleaning, the robot vacuum cleaner continuously checks the cleaning algorithm, and
by calculating the distance from the charging station and the remaining cleaning area it can
return to charging again. In this case, when returning to the charging dock, it gives the voice
command 'Recharging' and the notification from the app. If, when returning to the charging
dock, the user starts a cleaning task again, the robot's unfinished task is canceled.
When the battery is charged, the cleaning starts again for the remaining area and is
completed. In this case, it returns to the station with the voice command 'Cleaning
completed' and the application notification.
At first start-up, remove any obstacles that could cause the device to give error and cause
problems, or put a physical barrier in front of it. Do not lift the device off the ground and
place it on a different point during the initial mapping. Otherwise you will lose the incomplete
map that it has scanned so far.