Beko METPOINT BDL compact Instructions For Installation And Operation Manual Download Page 75

Page: 75 / 108

Operation METPOINT® BDL compact

METPOINT® BDL compact

14.3.8.4.4 Definition unit

Main menu



Settings



Sensor settings



Virtual channels



Right arrow (2

page)



Unit

The selection of the unit is implemented by
pressing the desired unit button. The unit is ac-
cepted by pressing the

button.

A change between the individual list pages is
effectuated by pressing the

Page

button.

In the event that units cannot be selected, you
can create the unit yourself.

For this purpose, one of the free pre-defined

User_x

user buttons must be chosen. Paging is

effectuated with the

Page

button.

To enter the new unit, press the

Edit

button.

By pressing the text field

Unit

, a list with the

available units will appear.

Summary of Contents for METPOINT BDL compact













































































































Search results

Summary of Contents for METPOINT BDL compact

Reviews:

Brands by name

Popular brands

Beko METPOINT BDL compact, Instructions For Installation And Operation Manual

Search results

Summary of Contents for METPOINT BDL compact

Reviews:

Brands by name

Popular brands