Beko METPOINT BDL compact, Instructions For Installation And Operation Manual

Page: 7 / 108

Performance characteristics
METPOINT® BDL compact 7
4 Performance characteristics
Our longstanding practical experience in measuring and control technology was implemented in the new
METPOINT
®
BDL compact.
Stretching from the measuring data acquisition and automatic sensor identification via the visualisation
on the large color display, alarm signal, and storage, to the remote readout via web server – all of this
is possible with the METPOINT
®
BDL compact. An alarm message can be sent via SMS or e-mail in
connection with the BEKO METPOINT connect software.
With the 3.5" colour display with a touch panel, all of the information is visible at a glance. Operation is
very easy. All the measured values, measured curves, and exceeded limit values are displayed. With
a simple finger movement, the curve courses can be tracked from the start of the measurement.
The big difference to standard, paperless graphic display recorders is reflected in the simplicity of the
start-up and in the measuring data evaluation. All of the sensors are directly identified by the
METPOINT
®
BDL compact, and they are provided with voltage. Everything is ideally matched.
Multifunctional:
The METPOINT
®
BDL compact identi-
fies up to four sensors including all
BEKO sensors (consumption, dew point,
pressure, current, KTY, Pt100, Pt1000).
Any analog sensors (0/4 – 20 mA,
0 – 1/10/30 V), pulse) can easily and
quickly be configured.
Digital sensors can be connected via RS
485, Modbus RTU and SDI.
Flexible:
Network-compatible, and remote
data transmission worldwide via
Ethernet, integrated web server.
Alarm relay/trouble indications:
Up to 4 limit values can be freely
configured and assigned to 2 dif-
ferent alarm relays. Collective
alarms are possible.