Microwave Oven / User Manual
12 / EN
3.1 Fitted units
•
This appliance is only intended to be fully fitted in a kitchen.
•
This appliance is not designed to be used as a tabletop appliance or inside a cupboard.
•
The fitted cabinet must not have a back wall behind the appliance.
•
A gap of at least 45 mm must be maintained between the wall and the base or back panel of the unit
above.
•
The fitted cabinet must have a ventilation opening of 250 cm² on the front. To achieve this, cut back
the base panel or fit a ventilation grille.
•
Ventilation slots and intakes must not be covered.
•
The safe operation of this appliance can only be guaranteed if it has been installed in accordance with
these installation instructions.
•
The fitter is liable for any damage resulting from incorrect installation.
•
The units into which the appliance is fitted must be heatresistant up 90 °C.
Installation dimensions
min 45
Cupboard feet
Ventilation grid
min 45
50
460
250
C
There should be gap above the oven.
3 Installation and connection
