Beko 7178543900, User Manual

Page: 37 / 48

EN / 37
You can follow whether the Remote Control
function is On or Off through the function in-
dicator on the button.
If the Remote Control function is Off, all the
operations are handled on the washing ma-
chine and only status follow-up is allowed on
the application.
In the event that Remote Start function can-
not be turned on, appliance will make a
warning sound when you press the button.
This might happen in cases such as when
the appliance is turned on and there is no
paired smart device via bluetooth. Bluetooth
settings being Off or the washing machine's
door being open are examples for such
cases.
Once you activate this function on the wash-
ing machine, it will remain enabled apart
from certain conditions and allow you to
control your washing machine remotely via
bluetooth.
In certain cases, it deactivates itself for safety
reasons:
• When your washing machine undergoes a
power interruption.
• When programme knob is turned and a
different programme selected or appliance
is turned off.
6.15.5 Troubleshooting
If you are having trouble on controlling or
connecting, apply the following steps. Ob-
serve whether the problem persists or not
after the action you have performed.
a. Check whether your smart device is con-
nected to the relevant home network.
b. Restart the product application.
c. Turn bluetooth off and then on via user
control panel.
d. If the connection cannot be established
with the above processes, repeat the ini-
tial set-up settings on the washing ma-
chine.
If the problem persists, consult an Author-
ised Service Agent.
6.16 Drum Illumination
Your machine's drum illumination lights up
during program selection. The light will turn
off when you start the programme. If no pro-
gramme is started or no key is pressed
within 10 minutes during programme selec-
tion process, the drum illumination lamp will
turn off.
Your machine's drum illumination lights up
after programme has completed. It will go off
when you turn off your machine with the
Programme Selection Knob. The drum illu-
mination lamp will turn off if you do not press
any button within 10 minutes after the pro-
gramme has ended.
7 Maintenance and Cleaning
Please read the “Safety Instructions”
section first!
Service life of your product extends and fre-
quently experienced problems will be re-
duced if it is cleaned at regular intervals.
7.1 Cleaning the Detergent Drawer
When to clean
• When you open the dosing tank cover and
see a thickened non-fluid detergent or
softener,
• If you are not satisfied with the washing
results, it may be that the detergent or
softener has become stiff and therefore
cannot be taken into the washing area,
• If the liquid in the tank does not decrease
although dosing is selected and you do
not load detergents or softeners for a long
time,
• If you want to change the washing ingredi-
ents you have filled in the chamber (for ex-
ample, if you are not satisfied with the de-
tergent and do not want to use it) or if you