Beko 7178543900, User Manual

Page: 34 / 48

EN / 34
In order to use the Bluetooth feature of your
machine, you must download HomeWhiz
application from the application store of your
smart appliance.
Make sure your smart appliance is connec-
ted to the internet to install the application.
If you are using the application for the first
time, please follow the instructions on the
screen to complete your user account regis-
tration. Once the registration procedure is
complete, you can use all products with the
HomeWhiz feature in your house on this ac-
count.
You can touch the “Appliances” tab in the
HomeWhiz application to view appliances
paired with your account. Following the in-
stallation of the application, HomeWhiz func-
tion enables the washing machine to send
you instant notifications via your smart appli-
ance.
In order to use the HomeWhiz func-
tion, the application must be in-
stalled on your smart appliance, and
your washing machine must be
paired with your smart appliance via
Bluetooth. If your washing machine
is not paired to your smart device it
works as an appliance which does
not have a HomeWhiz feature.
Your product will operate as paired
to your smart device via bluetooth.
The controls made by means of the
application will be enabled through
this pairing. Therefore the bluetooth
signal strength between the appli-
ance and the smart device must be
adequate.
Please visit
www.homewhiz.com
to see
the Android and iOS versions sup-
ported by the HomeWhiz applica-
tion.
All the safety measures described in
"
GENERAL SAFETY INSTRUC-
TIONS " section of your user manual
apply to the remote operation
through HomeWhiz function as well
6.15.1 HomeWhiz Setup
In order for the application to run, a connec-
tion between your appliance and the Home-
Whiz Application must be established. For
this connection to be established you must
follow the steps below for setup procedure
on both the appliance and the HomeWhiz
Application.
a. If you are adding a device for the first
time, touch “Appliances” tab on the
HomeWhiz Application. Select “ADD AP-
PLIANCE” (touch here for setting up a
new appliance) button in the upper right
corner. Perform the setup by following
both the steps below and the steps in the
HomeWhiz Application.
b. To start the setup, make sure that your
machine is turned off. Press and hold the
On/Off button and the Remote Control
Function button simultaneously for 3
seconds to switch your machine to
HomeWhiz setup mode.
c. When the appliance is in HomeWhiz
setup mode, you will see an animation on
the display and the bluetooth icon will
flash until your machine gets paired with
smart device. Only programme knob will
be active in this mode. Other buttons will
be inactive.
d. Follow the instructions on the display of
HomeWhiz application.