Beko 7178543900, User Manual

Page: 32 / 48

EN / 32
If no programme is started or no
button is pressed within 10 minutes
during programme selection pro-
cess, the product will automatically
turn off. Display and all indicators
turn off.
If you press On / Off button, the de-
fault selected programme informa-
tion is displayed.
6.11 Loading Door Lock
There is a locking system on the loading
door of the machine that prevents opening
of the loading door in cases when the water
level is unsuitable.
"Door Locked" symbol appears on the dis-
play when the loading door is locked.
If the Remote Control Function is se-
lected, the door will be locked. In or-
der to open the door you must de-
activate Remote Start Function by
either pressing the Remote Start
button or changing the programme
position.
Opening the loading door in case of
power failure:
In case of power failure, you can use
the loading door emergency handle
under the pump filter cap to open
the loading door manually.
To avoid any water overflow before
opening the loading door, make sure
there is no water left inside the ma-
chine.
a. Turn off and unplug the appliance.
b. Open the pump filter lid.
c. Pull down the loading door emergency
handle with a tool and release. Then
open the loading door.
d. If the loading door does not open then
repeat the previous step.
6.12 Changing the Selections After
Programme has Started
Adding laundry after the programme has
started :
If the water level in the machine is suitable
when you press Start/Pause button, the
door lock will be deactivated and the door
will open, allowing you to add garments. The
door lock icon on the display goes off when
the door lock is deactivated. After adding
garments, close the door and press Start/
Pause button once again to resume the
washing cycle.