Beko 7178543900, User Manual

Page: 17 / 48

EN / 17
We recommend filling the detergent com-
partment with liquid detergents that can be
used in common for coloured and white
laundry.
If the detergent symbol is flashing even
though the detergent compartments are
filled, the detergent drawer is not seated
properly. Push the drawer so that it is fully
seated.
WARNING
When the detergent drawer is filled
with detergent and/or softener; do
not pull or move the equipment, and
do not tilt it on either side or back.
Before conducting these operations,
the detergent drawer must always
be removed from the machine.
If you wish to start the program while
there is no detergent in the deter-
gent drawer, liquid detergent dosage
must be cancelled and washing with
powder detergent is required.
Only liquid detergent must be put in-
side the liquid detergent dosing tank
and only softener must be put in the
softener dosing tank. Putting all
kinds of liquid and powder chemic-
als together inside the tanks may
damage your laundry or your ma-
chine.
5.6.2 Dosage Selections, Cancella-
tion or Use of Powder Deter-
gent
Liquid detergent cannot be selected in some
of the programs. Powder detergent must be
used in these cases. For more information,
see Programme Table.
If powder detergent is to be used in pro-
grams where the detergent dosing system is
operating, desired amount of detergent is
put into the powder detergent compartment.
If the detergent compartment in the middle is
to be used, the automatic dosage selection
must be deactivated.
Machine measures the load and determines
the right amount of detergent depending on
the load amount and the selections made
previously. The detergent taken is not visible
while washing, it is taken directly with water
over the laundry.
If another liquid detergent with different
properties than the one in the liquid deter-
gent dosing tank is preferred to be used, li-
quid detergent with said different properties
should be put in the powder detergent com-
partment in the middle and the liquid deter-
gent dosage selection should be deactiv-
ated.
Softener will be taken from the dosing sys-
tem.