1.
Description
2.
Operation
2.1 Controls
3.
Applications
3.1 Transmitter loops
3.2 Remote indication
4.
Installation
4.1
Location
4.2
Installation procedure
4.3
Indicator earthing
4.4
EMC
4.5 Scale card
5.
Configuration and Calibration
5.1 Summary of configuration
functions.
5.2 Indicator function
5.3 Resolution
5.4 Position of decimal point
5.5 Calibration using an external
current source.
5.6 Calibration using internal
reference.
5.7 Bargraph format and calibration
5.8 Function of the
P
push button
5.9 Tare function
5.10 Security code
5.11 Reset to factory defaults
5.12 Under and over-range
6. Lineariser
6.1 Lineariser calibration using an external
current source.
6.1.1
Example, adding break-points
to a new indicator.
6.2 Lineariser calibration using internal
reference.
6.2.1
Example, adding break-points
to a new indicator.
6.3 Under and over-range
6.4 Lineariser default configuration
7. Maintenance
7.1 Fault finding during commissioning
7.2 Fault finding after commissioning
7.3 Servicing
7.4 Routine maintenance
7.5 Guarantee
7.6 Customer comments
8. Accessories
8.1 Scale card
8.2 Tag information
8.3 Alarms
8.3.1 Solid state output
8.3.2 Configuration and adjustment.
8.3.3 Alarm enable
8.3.4 Setpoint adjustment
8.3.5 Alarm function
8.3.6 Alarm output status
8.3.7 Hysteresis
8.3.8 Alarm delay
8.3.9 Alarm silence time
8.3.10 Flash display when alarm
occurs.
8.3.11 Access setpoint in display
mode.
8.3.12 Adjusting alarm setpoints from
the display mode.
8.3.13 Displaying setpoints on
bargraph.
8.4 Display backlight
8.4.1
Loop powering the backlight
8.4.2
Separately powering the
backlight.
2222222222222222222222222222222222222222222222222
CONTENTS
The BA507E-SS & BA527E-SS are CE marked to show compliance with the European EMC Directive 2004/108/EC
