VISTA DIGITAL INKJET PRINTER MANUAL
Beijing Innovation Technology Co.,Ltd. PAGE 27
www.jhfvista.com
TEL
：
86 10 62950101 FAX
：
86 10 82410746
The vacuum cleaner is prepared by the user. It is suggested to use dry-wet multiple use type vacuum cleaner,
with about
1000
w power.
（
Picture 2-16
）
Automatic Cleaning Terminal
（
Picture2-17
）
Print head protection tray
3
．
Cleaning print head tool: The user needs non-spin fabric, injector, test paper, and solvent to clean the
print head.
4. The machine is equipped with a print head protection salver as the picture 2-7. The end-user can put the
solvent into the antisepsis sponge and cover the tray below the print head carriage holder after stopping
printing but with the print heads on the machine. When you doing that, please make sure the tray covers the
print heads and absorb the magnet against the print head carriage holder. It can last the print head wet for at
most 8 hours if there isn’t any space. If there is any space between the magnet and print head carriage
holder, please use the antisepsis sponge for replacement. It is not absolutely safety way. It is just a kind of
convenient tool.
Note: when the general power or the power for the print head is on , do not use the protection salver, or else
the circuit in the print head will be disturb, and affect the print head.
