VISTA DIGITAL INKJET PRINTER MANUAL
Beijing Innovation Technology Co.,Ltd. PAGE 28
www.jhfvista.com
TEL
：
86 10 62950101 FAX
：
86 10 82410746
3 Operation
Instruction
3.1 Operation sequence outline
1) Please put the package at working place. Prevent it from shaking.
2) Please disassemble the crate step by step and check the spare parts according to the attached
package list. Using a forklift to move the printer to the working house.
3) Check if the printer is put at a good level.
4) Move away all fastened spare parts from the print head carriage and install all the spare parts.
5) Move the print head carriage by hand to make sure if the print head carriage belt and linear encoder
sensor are installed in suitable position.
6) Grounding the printer to make sure the static voltage is below 1 V.
7) Put the PCI card inside the computer and connect the flat cable and movement controlling cable
between the computer and printer and also check its other power cables and signal cables to make sure
they are connected well and rightly.
8) Install the printing software and RIP software with the computer.
9) When turn on the printer, please put the hand nearby the emergency switch to deal with the
accident.
10) Send a file to the printer to check the printing
11) Turn off the printer. Please fix the print head and then fix the signal cables between the print head
and transforming board.
12) Please clean the print head one by one with the cleaning solution. Please keep the cleaning
solution in the print head at least 10 minutes in order to get ride of the protection liquid inside the print
head absolutely. Additionally, please let off the cleaning solution from the print head completely.
13) Connect the ink supply system, which supplies the ink.
14) Please use the positive or negative pressure to make the ink out of the print head, and then wipe off
the superfluous ink on the print head face.
15)Printing color bar to see how the print head jets ink
