V1.0K3 PULSE OXIMETER INSTRUCTION MANUAL
2
1 Introduction
1.1 Brief Introduction
Thank you for purchasing the pulse oximeter. The main functions of the device include
Haemoglobin Saturation (SpO
2
) and pulse rate (PR) measurements, visual and audible
alarm, batteries charging, data storage and review, USB cable and Bluetooth
®
for data
transmission, etc. Please read this manual carefully before using the device.
Note: The illustrations applied in the manual may differ slightly from the actual unit.
1.2 Safety Information
Conception of Warning, Caution and Note
The Warning, Caution and Note at this document are special information in favor of user’s
operation.
¾
Warning - Indicates a potential hazard or unsafe practice that, if not avoided, will
result in death or serious injury.
¾
Caution - Indicates a potential hazard or unsafe practice that, if not avoided, could
result in minor personal injury or product/property damage.
¾
Note - Provides application tips or other useful information to ensure that you get
the most from your product.
Warnings
z
Users should follow all instructions listed in this manual. Our company will assume no
warranty for using this equipment improperly.
z
Do not use the oximeter in the presence of flammable anesthetics, vapors or liquids.
z
Do not use the oximeter in an MRI or CT environment.
z
This equipment is intended only as an adjunct in patient assessment, and the
measurement results only serve as a reference for any relevant treatment.
z
Connect the probe correctly; please see the directions for use of any accessories.
z
Prolonged use of the probe/sensor or the patient’s condition may require changing the
sensor site periodically. Change the sensor site and check skin integrity, circulatory
status, and correct alignment at least every 4 hours. Prolonged use may cause blisters,