V1.0K3 PULSE OXIMETER INSTRUCTION MANUAL
12
shown in Fig.3-1. When the SpO
2
probe is connected well, please set the fixing clip up to
ensure the probe well connected.
Fig.3-1
The indicator
will be shown on the display screen when the probe is well connected. If
the probe is disconnected from the unit, the indicator
and the prompt “Probe Off
！！
！
”
will appear in the status column.
The socket is also used for USB cable connected with the PC for data transmission. For
more information on data transmission and data management, refer to the corresponding
software instruction manual.
4 Setting ID, Date and Time
Always set the date and time before using the unit for the first time. Set different ID
numbers for different users.
Check the date and time are correct before using the unit, and reset them if necessary.
The date and time are important indicators when a measurement is taken.
4.1 Date & Time Settings
Set the correct time according to the following steps:
1) Press the power switch for 3 seconds to power on the oximeter and then press the
menu button to enter the main menu, refer to Fig.4-1.