V1.0K3 PULSE OXIMETER INSTRUCTION MANUAL
23
The beep on or off can be displayed in the main screen by the symbol
and
.
6.3.4 Display Mode
You can set the display mode Digital or Wave by entering the Display Mode sub-item. First
press the OK button to highlight it and then press the Up or Down button to select Digital
or Wave item, last press the OK button again to confirm your selection.
This two display modes are shown in Fig.5-2&5-3.
6.3.5 Keyboard Lock
Enter Keyboard lock screen from the System Setting screen, and set the lock function
on/off. If set to on, long press the Lock button, all the keys but the Return/Lock button will
be deactivated.
To unlock the keyboard, long press the Lock button again.
6.3.6 Power Auto
Enter Power Auto screen from the System Setting screen, and set the auto power-off time
and the auto power-off on/off.
Auto power-off time: Set the time that no operation lasts before the device automatically
powers off.
Time: 1,2,3,4,5…15 minutes.
Auto: Set the auto power-off function on or off.
Note: The auto power off time cannot be set in the charging process.
6.3.7 Print Setup
Enter Print Setup screen from the System Setting screen, you can set the Print ON /OFF
and the Print Item. Press the Up or Down button to select the item that you want to set,
and press the OK button to highlight it. Press the Up or Down button to change its value,
and then press the OK button again to confirm your setting.
Note: Only in the interface of Data Review as shown in Fig.6-3 the data can be
printed.
Provided that the printing paper has installed correctly, the steps for printing are as
follows:
1.
Set the Print ON in the system setting menu firstly.
2.
Press the PRINT button on the front panel secondly.