12
13
XENYX QX2442USB
Quick Start Guide
XENYX QX2442USB Controls
(1)
(2)
(3)
(6)
(9)
(7)
(8)
(5)
(4)
(21)
(22)
(19)
(20)
(14)
(16)
(15)
(13)
(18)
(17)
(10)
(11) (12)
(EN)
Step 2: Controls
(1)
USB
wireless input accepts a USB
receiver for use with BEHRINGER ULM
wireless microphones.
(2)
GAIN
knob adjusts the sensitivity of the MIC
and/or LINE inputs.
(3)
COMP
knob adjusts the amount of
compression effect on the channel.
(4)
EQ
knobs adjust the high, mid and low
frequencies of the channel. Adjust the FREQ
knob to select the specific frequency adjusted
by the MID knob.
(5)
AUX
knobs adjust how much of the channel’s
signal routes to the AUX SEND jacks.
Press the PRE button when routing the
signal to a stage monitor. Use the FX knob
to send the channel’s signal to the internal
multi-FX processor.
(6)
PAN/BAL
knob positions the channel in the
stereo field.
(7)
MUTE
button mutes the channel.
(8)
CLIP LED
lights when the channel
signal overloads.
(9)
CHANNEL FADER
adjusts the channel volume.
(10)
AC IN
accepts the included power cable for
connection to a mains outlet.
(11)
POWER ON
switch turns the mixer on
and off.
(12)
PHANTOM ON
switch sends 48 V
to the XLR inputs for use with
condenser microphones.
(13)
MULTI-FX PROCESSOR
adds a selected
sound effect to any channels whose
FX knob is turned up. See the Multi-FX
Processor section for details.
(14)
AUX SENDS
adjust the amount of signal
sent to a monitor speaker or external
effects processor via the AUX SEND jacks.
(15)
AUX RETURNS
adjust the amount of
signal returning from an external effects
processor that is included in the main mix.
Use the TO AUX SEND knob(s) to include the
effects signal in your monitor mix as well.
(16)
SOURCE
buttons route the USB/2-TR,
SUB, and MAIN MIX to the PHONES and
CONTROL ROOM jacks.
(17)
USB/2-TR TO MAIN
button routes the
USB and 2-TRACK signal to the MAIN MIX.
(18)
PHONES/CTRL ROOM
knob adjusts the
headphone or studio monitor volume.
(19)
VU METER
displays the MAIN OUTPUT
signal level.
(20)
MODE
button determines whether
the channel’s SOLO button operates as
‘Solo in Place’ (button out) or ‘Pre-Fader
Listen’ (button in). PFL is preferred for gain
setting purposes.
(21)
SUB
faders adjust the output of the
SUB OUTPUT jacks. Use the LEFT/RIGHT
buttons to assign the SUB signal to the left
and/or right MAIN MIX.
(22)
MAIN MIX
fader adjusts the overall output
of the mixer.
Summary of Contents for Xenyx QX2442USB
Page 19: ...We Hear You ...