24
PROTECT MEM
The PROTECT MEMORY function switches the write protect for the program memory on and off. You can
use a PASSWORD in this case, too.
EQ LO / EQ HI
The two functions EQ LO and EQ HI determine the area of program memory which will be protected by the
PROTECT MEMORY function. EQ LO determines the lowest, EQ HI the highest program number of the
protected area. Switching OFF means the PROTECT MEMORY function is deactivates only for the equalizer.
RTA LO / RTA HI
+
The two functions operate identically to EQ LO and EQ HI, except they determine the
protection of the RTA programs.
+
All the SETUP settings are stored when switching off the ULTRA-CURVE PRO, and remain
unchanged until you re-edit them.
Refer to the MIDI SETUP for all MIDI settings.
Fig. 2.11: MIDI Setup window
MIDI SETUP
To find the general SETUP press and hold down the
SETUP
-key for more than two seconds. Once in the
general setup, pressing the SETUP-key will toggle between GLOBAL SETUP and MIDI SETUP.
MIDI
Here the MIDI function is switched on or off. Toggle between ON and OFF with the +/- buttons.
CHANNEL
This field indicates the actual MIDI Channel.
OMNI MODE signifies that MIDI commands from all channels are
received.
SND MEMORY DUMP
You can send a MIDI Dump using the +/- buttons. The complete memory will be transferred and can be stored
externally.
RCV MEMORY DUMP
You can start the reception of a MIDI Dump using the +/- buttons. The externally saved data can be reloaded.
CNTL
MIDI Control Change Data can be sent and received. The first controller number is selected using the +/-
buttons. The following 64 numbers correspond to the frequencies 20 Hz .... 20 kHz and
Master.
First the left,
and then the right channel.
PROG
MIDI Program Changes can be sent and received. This is chosen by
ON
and
OFF
respectively in the display.
EXCL
System Exclusive Data can be sent and received. This is advantageous for communication with the EQ-DESIGN
Remote Control Software.
2. OPERATION
All manuals and user guides at all-guides.com
Summary of Contents for ULTRA-CURVE PRO DSP8024
Page 49: ...49 E Fig 6 7 RTA window 6 APPENDIX All manuals and user guides at all guides com...
Page 54: ...All manuals and user guides at all guides com...
Page 55: ...All manuals and user guides at all guides com...
Page 56: ...All manuals and user guides at all guides com a l l g u i d e s c o m...
