manualshive.com logo in svg

Beholder Beholder-EC1, Instruction Manual

Share
Download
Beholder Beholder-EC1 Instruction Manual Download Page 5

3

   

 

Main features

 

Beholder EC1 features
Dimensions: 360x184x79mm
Compatibility: Mirrorless & DSLR Cameras up to 5 lbs
Main Features:

•  32-bit controller with motor control units (MCUs) and 12bit Encoder    

   system

•  OLED screen display for power and battery level
•  OLED screen display for Profile Mode and joystick
•  3-axis gimbal stabilizer and 4-axis toolless design
•  3-axis 360° Pitch, Roll, Pan (no limitation)
•  Quick-release plate compatible with Manfrotto 577
•  4-way joystick to control the pitch and roll angle
•  3s 3.7v 2600 mAh Detachable Rechargeable batteries
•  Battery with an operation time of up to 20 hours
•  One 3/8" screw hole in the handle bottom and two 1/4" hole on the 

   side for mounting accessories like a monitor or  microphone

•  Increase the precision of stabilization by applying FOC-specific 

   compensations

•  Five pre-configured profiles including Follow, Pitch Lock, Full Lock, 

   Follow Roll, and Home position

•  Prevents motors from losing synchronization and skipping steps
•  Auto-Invert-Mode (all profiles can also be used in this condition)
•  Bluetooth module for remote control (not included)
•  2.4g wireless joystick module for remote control (not included)
•  Supported temperature accelerometer calibration

 

    

 2016 Beholder      All Right reserved

Summary of Contents for Beholder-EC1





























Reviews:

No comments

Brands by name

Popular brands

Load more brands