10
STEP 1
Mount the camera quick release
•
Remove the quick release
plate from the gimbal.
• Attach the quick release plate to
the camera (Fig. 4), make sure it
is tighten enough
• Make sure the quick release plate
direction is forward toward the
lens.
Fig. 4. The camera is attached
to the quick release plate
Fig. 5. Mounting the
camera to Button Mount
Base .
STEP 2
Install the camera on gimbal base
• Install the camera with quick
release mounted into the Beholder
EC1 bottom mount base (Fig. 5).
• Slightly adjust the position of the
camera into the base until you find
a horizontal balance.
• Shift the camera as close to the
pitch motor as possible. Use the
base plate positioning if needed.
• Tighten the thumb screws.
• Use a screwdriver to tighten the
1/4 quick release screw.
2016 Beholder All Right reserved
