manualshive.com logo in svg

Beholder Beholder-EC1, Instruction Manual

Share
Download
Beholder Beholder-EC1 Instruction Manual Download Page 27

Frequently asked questions 

Most used questions and answers

1. How to charge the gimbal?

    Beholder-EC1 can be charged in two ways: using the built-in 
battery holder micro USB or using a separate authorized dedicated 
charger (recommended).

Charging using battery holder:
– remove the battery cap cover on the bottom of the handle.
– take the battery holder out.

– connect the power cable to the Micro USB.

– Connect the other cable end to power supply.
Charging using a dedicated charger
– buy a authorized smart charger
– release the battery holder
– take out the batteries and charge with fast charger.

TIP

Fully charged batteries indicate a stable voltage of 4.21V

TIP

After balancing the camera, mark the position with a pen. This 

will help finding the balance faster next time you mount the same 

camera and lens.

2. After mounting the quick release plate, sliding it into the 
    stabiliser seems dificult?

    Release the 1/4 screw about two turns, then insert to the gimbal 
QR base.

25 

   

 

 

    

 2016 Beholder      All Right reserved

Summary of Contents for Beholder-EC1





























Reviews:

No comments

Brands by name

Popular brands

Load more brands