Fig. 12 Camera mount – left side or right side roll arm
Precautions
Things to consider before use
Beholder EC1 is shipped from the factory with perfect calibration.
However, after a long period of unuse or if the temperature
difference is too large, it may cause the gyro to drift automatically or
to tilt during use.
Gyro Correction:
Place the Beholder EC1 horizontally on the table,
power on the gimbal and press and hold the mode button for 6
seconds to start gyro calibration. The system automatically enters
the gyroscope calibration mode. The motors lose power for 5
second. After that, automatic system calibration is complete and the
20
Mount modes
Mounting options
Beholder EC 1 supports two camera mounting options: Roll arm to
the left or roll arm to the right of the center (Fig. 12). Right side is
useful if your camera have a flip screen.
2016 Beholder All Right reserved
