14
[joystick]
[Power Switch]
[Mode button]
Power ON
Starting the gimbal in default profile
• Press the power button for two solid second to power the gimbal on
(Fig. 9 [2]).
• The gimbal start in Pan follow mode.(Profile 2)
• Use the five-way joystick (Fig. 9 [1]) to control the camera tilt and
pan direction. Push the joystick up or down for tilt up and down.
Push the joystick to left or to right to pan camera to left or right.
Fig. 9. Gimbal 4-way joystick
TIP
Make sure the batteries are fully charged before starting the gimbal.
Adjust the gimbal and camera position before use. Beholder EC1
uses the latest 32-bit encoding technology and can start up in any
direction and at any angle.
2016 Beholder All Right reserved
