15
Modes of Operation (Profiles)
Switching the gimbal to different modes of operation (profiles)
• Press the mode button one time, which is located under the
OLED screen to enter
Lock Mode (Profile 1)
: camera will hold
the direction and not follow, pan, or tilt.
• Press the mode button twice to enter
Pan-Follow Mode (Profile
2)
: gimbal follows pan and holds the tilt position.
• Press the mode button three times to enter
Follow Mode
(Profile 3)
: camera follows the tilt and pan directions.
• Press the mode button four times to enter
Full Follow Mode
(Profile 4)
The gimbal will follow roll,pitch,pan.
• Press the mode button five times to enter
Profile 5
: level roll and
bring the pitch to the horizon.
• Press the mode button and hold for six seconds to calibrate the
gyro.
2016 Beholder All Right reserved
