manualshive.com logo in svg

Beha-Amprobe GT-650, User Manual

Share
Download
Beha-Amprobe GT-650 User Manual Download Page 60

GT-650/GT-900 User's Manual 

60 

 

 
1  ......  “

” menu key, to switch between two selections of menu keys. 

2  ......  “TODO” menu key, to check the list of all appliance codes* in the database  

which are not tested yet. TODO will be displayed at the upper line as a    
header and number of not tested appliances* will be displayed in window 6.  
After pressing the “TODO” menu key desired appliance codes* to be  
tested can be selected. Use the “EXIT” function key to exit TODO  
mode. 

3  ......  “NEW” menu key, to create/enter new appliance code*. 

 

 

 Note! Each appliance code must be unique under the same client (two  

 

 equal appliance codes are not allowed, the GT-650/GT-900 tester  

 

 will block double entering the same appliance code). 

 

4  ......  “SEL” menu key, to display list of all appliance codes* (no appliance root is  
 

 entered) or just a list of appliance codes* containing entered root  

 

 (appliance root is entered). Wished appliance root can be entered after  

 

 changing the selection of menu keys by pressing the “

” menu key. 

5  ......  Window reserved for displaying the first three of all appliance codes*  
 

 (no appliance root is entered) or just the first three of appliance codes*  

 

 containing entered root (appliance root is entered). These Appliance  

 

 Codes* will be selectable after pressing the “SEL” menu key. 

6  ......  Window reserved for displaying the number of all appliance codes* in  
 

 database or for displaying the number of only not tested appliances*, if  

 

 “TODO” mode is used.  

 

 Notes! 

 

In both cases (TODO mode used or TODO mode not used) the number in 
window 6 depends also on entered appliance root. If no appliance root is 
entered, then number of all appliance codes* will be displayed. 

 

If there are no appliance codes* in database yet (= empty), then keys 
“TODO” and “SEL” will not be offered. 

 

Explanation of the star sign (*) used in this manual: 
Parameters/expressions marked with the * sign refer to selected client 
code only (client code is selected in MENU / CLIENT menu) or to all client 
codes in database (client code is disabled – FILTER DISABLED is displayed in 
MENU / CLIENT menu), see the section “CLIENT menu” on page 70. 

 
Test procedure for AUTO-TEST standard way in STANDARD mode: 
Standard way means that an appliance code* with belonging attributes is 
selected/entered before starting the AUTO-TEST as offered on the display. 
STANDARD mode means that test steps are done one after another with manual 
start (START key) of each step. 
 
STEP 1 
As shown in the figure 46 above, the first step in AUTO function is to select an 
appliance code where the AUTO-TEST will be carried out. 
 
Select one of existing appliance codes* from database:  
Press the “SEL” menu key in idle display, the list of first four entered appliance 
codes* will be displayed. Select wished appliance code by using the “

” and “

” 

menu keys and confirm it by pressing the “

 “ (Enter) menu key. 

 

 

Summary of Contents for GT-650













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands