Beha-Amprobe GT-650, User Manual

Page: 31 / 108

GT-650/GT-900 User's Manual
31
Display explanation:
Figure 21: Display in earth leakage current test I
PE
(example)
1 ...... “POL” menu key for selection of mains voltage polarity (GT-900
only).
2 ...... “LIM” menu key for pass/fail limit value setting.
3 ...... Test result status ( ... result OK, X ... result not OK).
4 ...... Selected mains polarity (GT-900 only).
... phase connected to the right terminal of mains socket.
... phase connected to the left terminal of mains socket.
5 ...... Pre-set pass/fail limit value.
6 ...... Function selected by the rotary switch (6).
7 ...... Max. value detected during the measurement.
8 ...... Last test result and unit.
Specific information that can be shown on the display
Information displayed Description
EXTERNAL VOLTAGE
External voltage is applied to one or more
test terminals, see the explanation in
section “Pre-Tests and Protection”.
Warning! Mains voltage will be applied to
mains socket after confirming this
message!
NO DEVICE
Note! No appliance is connected to mains
socket, or mains switch on the appliance is
switched OFF!
>20.00mA X
I
PE
current higher than 20.00 mA (over-
range).
VOLTAGE OVER RANGE
Voltage higher than 30 V approx. is
present on PROBE 2. Remove the voltage.

In order to save displayed measurement results, see the “Memorizing example”
section.
+
MAINS SWITCH ON
CONTINUE?