16
Troubleshooting / FAQ’s
Headpiece only displays “Strt”.
The headpiece must travel past the reference dot after it is turned on to
display a numeric value.
The display does not change while the headpiece is being raised.
The measurement value only changes while the headpiece is moving
downwards. This is an intentional design feature that is part of the auto-
hold function. Once the measurement is taken, the headpiece can be
raised out of way so the subject can move away from the height rod and
the measurement value is retained.
If I don’t like the measurement, can I quickly re-measure?
Sure, while the subject is still under the headpiece, simply raise the
headpiece a little ways and then lower to take a second measurement.
Is there a quick way to do a calibration check?
Yes, once calibrated, the value when the headpiece is all the way down
(against the lower endcap) is a constant. You can record this value and
quickly check whenever desired.
Why does the height rod display 5’ 7.3” as 5. 7.3?
This is a limitation of the bright LED digits. We have found people become
accustomed to this format very quickly.
5
Before Assembly
ASSEMBLY INSTRUCTIONS
Carefully inspect the carton for shipping damage before unpacking. If
significant damage is found, keep all packaging and contact your shipper or
Befour immediately. Claims must be filed with the shipper as soon as
possible after receipt of damaged goods.
Carefully unpack the components from the shipping container.
Your
height rod contains the following items:
Rail assembly
Headpiece with digital readout
(1) lower end cap with two mounting screws
(2) “aaa” alkaline batteries
(2) wall anchors with screws
You will need to supply small and medium screwdrivers, a tape measure, a
level, and an electric drill.
Display
Knob
Battery
holder
On/off
button
Top mounting hole
in upper endcap
(BEFOUR label)
Reference
dot
Rail
Bottom mounting hole
In lower end cap
