6
Headpiece Battery Insertion & Display Format
At the same time the batteries are inserted, you may also select the desired
display unit of measure format.
1. Open the battery cover on the top of the headpiece.
2. Insert the (2) aaa batteries, leaving one end up as shown below.
3. Press the on/off button. While continuing to hold the on/off button down,
insert the battery fully in to the headpiece.
4. After 3 seconds, “InIt” will display. Thereafter, the display will continue to
sequence through your three display options while you hold down the
button:
Inch nnnn Feet
(inch display) (centimeter display) (feet & inch display)
(i.e. 79.3) (i.e. 201.4) (i.e. 6. 7.3)
5. To select your format, release button when the desired format appears.
6. Replace the battery cover.
Note: Display format selection can also be made any time after the height
rod is mounted to the wall.
15
CARE AND MAINTENANCE
Cleaning Procedures
Proper care and cleaning of the HTR-101 is essential to ensure a long life of
accurate and effective operation.
All external surfaces can be wiped clean with a damp cloth or tissue. A mild
soap and water solution may be used as well. Wipe unit dry with a clean,
soft towel.
DO NOT
immerse any part into cleaning or other liquid solution.
DO NOT
use isopropyl alcohol or other such solutions to clean the
headpiece.
DO NOT
use abrasive cleaners.
