14
3. Have the patient stand under the
headpiece.
Lower the headpiece so it just
touches the crown of the head.
To re-measure, raise and then
lower the headpiece.
When measurement is complete,
raise the headpiece and have the
patient walk away. Value will
remain locked on the display for
30 seconds. Push on/off button to
turn off. Display will turn off
automatically after 30 seconds of
non-activity.
Make sure headpiece is stored
near top position.
!
NOTICE
The height measurement value displayed does not change while the
headpiece is being raised.
For safety, leave the headpiece in the top position when unit is not in
use.
Keep magnets away from height rod.
You may change the display format at any time by repeating the steps
outlined on page 6.
7
Assemble the Height Rod
Position the rail, the headpiece, and
the lower end cap. The lower end cap
will arrive with two small black phillips
screws partially tightened in the end
cap.
Slide the headpiece into the dovetail
grooves in the rail.
Slide the lower end cap into the rail
grooves and secure by screwing in the
(2) small black phillips screws. Do not
over tighten.
screws
