Beem Multi-back Topclass, User Manual

Page: 29 / 88

27
EN Multi-back Topclass 3 in 1
BEEM - Elements of Lifestyle
The mains cable must not pulled ■
tightly, bent or come into contact with
hot surfaces.
Route the cable to prevent risk of trip-
■
ping.
The electrical safety of the appliance
■
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
Appliance description
(See illustration on the left fold-out page)
control panel and display 1
Lid 2
Window 3
Ingredients dispenser 4
Bread baking mould 5
Kneading hook 6
cake baking mould 7
Stirring hook 8
Measuring spoon 9
Measuring cup 10
User manual (not illustrated) 11
Control panel and display (1a/1b)
NOTE
Press the buttons described below ►
repeatedly to test all setting options.
An acoustic signal is emitted each
time the button is pressed. Pay
attention to the display; it changes
each time the button is pressed.
Each combination of programme,
►
browning level and weight is auto-
matically displayed with the corre-
sponding baking time.
■ : Use this button to select from
the eleven preset programmes. The
set programme appears in the display
under Menu (baking programme 1 -
11).
■ : Use this button to set the weight
of the finished bread. You can choose
between three different sizes: =
540g, = 680g or = 900g. The
set weight is underlined in the display.
■ : Use this button to select one of
three different browning levels for pro-
grammes 1 - 4:
= light, = me-
dium, = dark. You can also shorten
the baking time in baking programmes
1, 2 or 3
The set browning level is
underlined in the display.
■ : Use this button to start the se-
lected programme. To stop the pro-
gramme, press and hold down this but-
ton for approximately two seconds.