Beem Multi-back Topclass, User Manual

Page: 37 / 88

35
EN Multi-back Topclass 3 in 1
BEEM - Elements of Lifestyle
NOTE
Short acoustic signals indicate when ►
the flap at the bottom of the dispens -
er opens. At this point, you can also
open the cover of the bread maker to
add the ingredients directly into the
baking mould.
When the baking process is complete,
‹
lift the ingredients dispenser out of
the appliance, clean it, close the flap
in the base and reinsert the dispenser
into the appliance.
Removing the ingredients dispenser
(image D1)
To remove the ingredients dispenser,
‹
lift it firmly out of the appliance.
Inserting the ingredients dispenser
(images D2 - D3)
To insert the dispenser, push the base
‹
flap until it closes and locks.
Press the ingredients dispenser into
‹
the appliance until it audibly snaps in.
Storage
If you do not intend to use the appliance
for a longer period of time, clean it as de-
scribed in the section Cleaning and care .
Store the appliance and all accessory
parts at a dry, clean and frost-free loca-
tion, which is protected against direct
sunlight.
Cleaning and care
Before beginning work, pay attention to
the safety instructions in the section on
safety!
clean the appliance after each use.
‹
To simplify cleaning, the lid of the ap-
pliance can be removed.
Lift the lid until it is upright and pull it
upwards out of the appliance (image
E1).
Wipe the appliance and the inside of
‹
the housing using a damp cloth.
Other parts used can be cleaned in
‹
warm dishwater. cleaning the bread
or cake forms or the stirring tools in a
dishwasher is not recommended as
plain aluminium parts will discolour. In
addition, the ceramic coating is very
sensitive to strongly acidic cleaning
agents. Frequent cleaning in the dish-
washer is detrimental to the non-stick
properties.
Allow sufficient time for the appliance
‹
to dry completely.
After cleaning, replace the lid (image
‹
E2). Hold the lid upright and push the
latches of the lid into the recesses in
the housing (see markings).