27
EN
8. Set the desired coffee strength with the button
(
19
) (see the “Handling and Operation”
chapter – “Setting the Coffee Strength”).
9. If you wish, switch on the aroma plus function using the
button (see the “Handling and
Operation” chapter – Aroma Plus Function”).
10. Press the button
(
18
) to switch on the grinder and start the brewing process. The
operating lamp
fl
ashes. Freshly ground coffee is transported through the grinder shaft into
the
fi
lter and then hot water is poured over it to brew it.
If the brewing process is to be aborted prematurely, press the
button. The operating
lamp goes out and the device is switched off.
At the end of the brewing process, three beeps will be heard and the device automatically
switches on the hotplate (see the “Handling and Operation” chapter – “Keep-Warm Func-
tion”).
Making Coffee with Coffee Powder
1. Fill the water tank (
11
) (see the “Handling and Operation” chapter – “Filling the Water
Tank”).
2. Open
the
fi
lter compartment (
5
).
3. Insert the permanent
fi
lter (see the “Handling and Operation” chapter – “Inserting the
Filter”).
4. Add the quantity of coffee powder you want to the
fi
lter using the measuring spoon which
is supplied with the device or another suitable spoon. We recommend one heaped spoon
for each 125 ml cup.
5. Close
the
fi
lter compartment.
6. Set the desired number of cups with the button
(
25
) (see the “Handling and Opera-
tion” chapter – “Setting the Number of Cups”).
7. If you wish, switch on the aroma plus function using the
button (see the “Handling and
Operation” chapter – Aroma Plus Function”).
8. Press
the
button (
24
). The
symbol (
14
) appears on the display. The grinder shaft
is not opened when the brewing process starts.
9. Press
the button (
18
) to start the brewing process. The operating lamp
fl
ashes. Hot water
is poured over the coffee to brew it.
If the brewing process is to be aborted prematurely, press the
button. The operating
lamp goes out and the device is switched off.
At the end of the brewing process, three beeps will be heard and the device automatically switch-
es on the hotplate (see the “Handling and Operation” chapter – “Keep-Warm Function”).
