25
EN
Setting the Grinding Fineness
Move the dial for the grinding
fi
neness (
8
) to the position you want (
fi
ne – medium – coarse)
(
Picture A
).
When you switch to another grinding strength, there will still be coffee powder with the
previous grinding strength in the grinder shaft. The grinder shaft may need to be cleaned
beforehand (see the “Cleaning and Care” chapter – “Cleaning the Grinder Shaft”).
Inserting the Filter
1. Open
the
fi
lter compartment (
5
).
2. Insert
the
fi
lter insert into the
fi
lter compartment.
3. Insert the permanent
fi
lter into the
fi
lter insert (
Picture B
).
4. Close
the
fi
lter compartment again. It must engage.
Setting the Number of Cups
Keep pressing the
button (
25
) until the display (
7
) shows the number of cups you want (
12
).
The selected number of cups is saved until a new number of cups is set or the device has
been disconnected from the power supply.
Setting the Coffee Strength
The coffee strength can be set when making coffee with coffee beans. To do this, keep pressing
the button (
19
) until the coffee strength (
13
) you want is shown on the display
(
7
).
Mild coffee
Medium coffee
Strong coffee
The selected coffee strength is saved until a new coffee strength is set or the device has
been disconnected from the power supply.
Aroma Plus Function
The brewing time can be extended with the aroma plus function. The extended brewing time
will give your coffee a more intense aroma.
1. First select the number of cups you want and the coffee strength (see previous sections).
We recommend that you only use the
fl
avour function for 2 or 4 cups. This is because
the brewing time for 6, 8 or 10 cups is long by default. An even longer brewing time
could make the coffee too bitter.
2. Press
the button (
19
) for at least 2 seconds until the display (
7
) shows .
Please Note! The aroma plus function switches off automatically after each brewing pro-
cess.
