USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx
QUESTIONS? EMAIL US AT [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
Revision 1.6 www.bedjet.com P a g e | 17
Compress excess length in the Air Hose so that only the shortest length needed is used.
Compress the hose length not needed nearest the BedJet exhaust, and leave the hose
completely expanded going to the Air Nozzle. Straighten the Air Hose as much as possible
for the most efficient operation.
HELP – WILL IT WORK WITH MY ARTICULATED BED FRAME?
The BedJet is articulated bed frame approved. It will work fine underneath adjustable bed
frames, provided care is taken to make sure that the BedJet and Air Hose are installed in a
location where the full range of frame articulation will not crush either component. This may
require fully extending the Air Hose to move BedJet further away from the Air
Nozzle/Mattress mount location than shown here.
HELP – CAN’T FIT THE BEDJET UNDER THE BED?
For situations where the BedJet cannot fit under
the bed, we offer the vertical mount BedJet stand
that allows you tuck the BedJet neatly against the
foot of the bed, out of the way and taking up a
tiny 6.5” by 17” footprint. The accessory can be
ordered from bedjet.com:
HELP – POWER CORD ISN’T LONG ENOUGH?
For situations where the BedJet power cord cannot conveniently reach a power outlet, we
offer users a low cost 4-foot Air Hose extension, giving 8-feet total hose length. The Air Hose
extension will allow you to place the BedJet nearly anywhere under the bed or around the
bed to be closer to the power outlet. You can order the hose extension at
www.bedjet.com
PLEASE EMAIL AT
OR CALL US WITH ANY
INSTALLATION RELATED QUESTIONS. WE ARE HERE TO HELP!
