USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx
QUESTIONS? EMAIL US AT [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
Revision 1.6 www.bedjet.com P a g e | 13
Maintenance
The only maintenance required for the BedJet is periodic inspection
and cleaning of the lifetime washable air intake filter. The lifetime
washable intake filter is designed to keep dust, lint, pet hair, etc.
out of the BedJet air flow stream.
Inspect and clean the filter every 3 months or when visually dirty
(or more frequently if shedding pets are near or around BedJet):
Press the round BedJet logo and pull air intake grill open to access
filter, remove the mesh filter and clean under household running
water. Reinstall filter when dry and close the air intake grill until it
snaps back in place.
Installation: Single Zone BedJet
Use the following instructions for a single zone BedJet installation. A single zone BedJet
installation is a single BedJet installed on any size bed, resulting in heating or cooling of the entire
bed as a single temperature zone. Settings on medium or low may allow only half sections of the
bed to be heated or cooled if desired (see Step #3). All required items and components for the
single zone installation are included in the BedJet box.
BedJet Installation Checklist:
Before installing BedJet under the Bed, assemble all parts and become familiar with BedJet
operation while the Status Display is still easily viewable:
1) Make sure battery is installed in remote control, the amber LED on remote control should
turn on when any button is pressed. Weak, flickering LED indicates low battery.
2)
Adjust the BedJet Dual Mode Switch according to your installation type (see page 12).
THIS IS VERY IMPORTANT.
