USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx
QUESTIONS? EMAIL US AT [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
Revision 1.6 www.bedjet.com P a g e | 9
Proper Assembly Required:
The BedJet is required to be installed onto a bed for proper operation. All parts included are
required to be fully assembled and installed onto the BedJet as part any operation. Do not
operate the BedJet without the included Air hose and Air Nozzle installed onto the BedJet. Do
not attempt to use the BedJet with air delivery accessories or air delivery components not
approved or supplied by BEDJET, LLC. Install only qualified air delivery components supplied by
BEDJET, LLC onto the BedJet.
Bedding Requirements & JetConvect
™
Theory of Operation:
The BedJet JetConvect™ air technology sends air directly into your sleeping layer. The BedJet
requires a typical top sheet or comforter to be used in bed for proper cooling and warming
operation. A quality top sheet or comforter must always be used to help trap and distribute the
BedJet air flow within the bed. Requirements for the top sheet or comforter are very simple, just
use any bedding material type (cotton, cotton blends, microfiber, etc) with a 250thread count
weave or higher. Alternatively the BedJet AirComforter™ accessory may be used as a
replacement for a typical top sheet or comforter (see Dual Zone Installation).
Use of loosely knit low quality top sheets with thread count below 250, or loose knit top sheet
weaves such as jersey knit or flannel, or performance “cooling” top sheets will result in sub-
optimal BedJet experience. Use of loose knit blankets with no top sheet or no comforter will
result in sub-optimal experience.
Using this type of bedding will allow the BedJet air to escape
at the bottom of the bed near the nozzle and only cool/warm your feet instead of the whole
bed.
Air Delivery Preferences:
The BedJet JetConvect™ technology warms and cools via quiet injection
of air into your bedding. Some users enjoy the feeling of ventilation and
movement air around their body and consider it delightful. Other users
may only wish to feel cooled or warmed and prefer to minimize the
movement of air under the sheets or around the body.
The BedJet accommodates both types of operation, depending on user
preference. See Cooling & Heating sections for more detail.
