USER MANUAL – MODELS 6002NA/V1/V2/ & 7002xx
QUESTIONS? EMAIL US AT [email protected] OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
Revision 1.6 www.bedjet.com P a g e | 21
Heating Mode Information & Tips for Better Enjoyment
Basic heating mode functions are available via the wireless remote control.
Operation using only the wireless remote control is limited to 1 to 4 hours
continuous warming as a safety feature (depending on Air Flow setting, set
page 19). Utilize the Bluetooth smart remote App with a smartphone or
tablet to activate advanced features including:
Warming auto-shutoff time extension to 12 hours using lower
temperature settings
Customized warming air temperatures(72 to 104 °F)
Presets for night-sweat drying modes
See Bluetooth App instructions for more information.
Turbo Heat:
This mode is best used as a pre-heater for warming your bed very quickly before getting into bed,
or for single short bursts while in bed. Turbo Heat pumps the maximum amount of heat into the
bed with the maximum amount of airflow and can warm the temperature of your bedding by up
to 30 °F (17°C) above ambient in just five minutes.
This mode has a very short default Auto-
Shutoff time of 5 minutes,
as the warmth generated and noise levels are too powerful for
extended use or comfortable sleeping.
Each press of the hourglass button on the wireless
remote will extend Auto-Shutoff by 1 additional minute, to maximum of 10 minutes.
Do not continuously re-cycle the BedJet into Turbo-Heat mode while in bed.
Do not place body parts directly into or in front of Air Nozzle in TurboHeat mode
TURBO HEAT MODE IS SOFTWARE LIMITED TO 10 MINUTES OPERATION OUT OF EVERY
30 MINUTES. ATTEMPTS TO CONTINUE OPERATION BEYOND THIS LIMIT WILL CAUSE
AUDIBLE BEEPING AND BEDJET WILL DEFAULT TO REGULAR HEAT MODE.
Heat (Normal)
This mode is suitable for gentle warming over extended periods and can be used while sleeping.
This mode has a default Auto-Shutoff time of 20 minutes. Each press of the hourglass button on
the wireless remote will extend Auto-Shutoff by an additional 20 minutes, to a maximum of 1
hour. For Auto-Shutoff heating operation extended to a full 12 hours, you must use custom Heat
Set mode on Bluetooth App using your smartphone or tablet. The Bluetooth App is the only
method to operate the BedJet in an all-night 12 hour heating mode.
