Beckman Coulter Biomek NXP, Preinstallation Manual

Page: 38 / 52

B20063AC
3-8
Preparing Cytomat Devices
Setting Up Optical Tables
6
Screw the enclosed two angle brackets into the predrilled holes using the layout drawings (see
Figure 3.3 ).
NOTE
The placement of the two angle brackets is determined by the system layout
(see
Figure 3.3
).
NOTE
Contact the nearest Beckman Coulter Service Representative if assistance is required to set up
the optical table.
Optical Table Layout
The optical tables must be placed in the proper positions. The following graphics (see Figure 3.3 and
Figure 3.4 ) illustrate the layout for the specific optical tables and indicate where the angle brackets
should be placed.