Mounting and wiring
KL2532/KS2532, KL2552/KS2552
35
Version: 3.2.0
4.9
KL2552-0005/KS2552-0005 - connection
WARNING
Risk of injury!
Bring the Bus Terminals system into a safe, de-energized state before starting mounting, disassembly or
wiring of the Bus Terminals.
Fig. 21: KL2552-0005/KS2552-0005 pin assignment
Terminal points
Left-hand section of the housing
Terminal point
No.
Connection for
Encoder A, A
1
Encoder A, connection A
Encoder B, A
2
Encoder B, connection A
Encoder Power +5 V
3
Encoder supply (via switching controller of positive power contact)
Input 1
4
Digital input 1 (24 V
DC
).
The current counter value is stored as reference mark in the latch
register, if bit
is set in control byte 1 and a rising edge
occurs at digital input 1.
Encoder A, B
5
Encoder A, connection B
Encoder B, B
6
Encoder B, connection B
Encoder Power 0 V
7
Encoder supply (via switching controller of negative power contact)
Input 2
8
Digital input 2 (24 V
DC
).
The current counter value is stored as reference mark in the latch
register, if bit
is set in control byte 2 and a rising edge
occurs at digital input 2.
