Beckhoff EPP1 Series, Manual

Page: 49 / 92

Product overview
EPP1xxx 49 Version: 1.4
3.12.2 Technical data
All values are typical values over the entire temperature range, unless stated otherwise.
EtherCAT P
Connection 2 x M8 socket, 4-pin, P-coded, red
Distributed Clocks yes
Supply voltages
Connection See EtherCAT P connection
U
S
nominal voltage 24 V
DC
(-15 % / +20 %)
U
S
sum current: I
S,sum
max. 3 A
Current consumption from U
S
100 mA
+ sensor power supply
Rated voltage U
P
24 V
DC
(-15 % / +20 %)
U
P
sum current: I
P,sum
max. 3 A
Current consumption from U
P
None. U
P
is only forwarded.
Diagnostics Undervoltage detection
• U
S
< 18 V
DC
• U
P
< 18 V
DC
Digital inputs
Number 16
Connection D-sub socket, 25-pin, UNC4-40 thread
Characteristics Type 3 according to EN 61131-2, compatible with type 1
Input filter 10 µs
Signal voltage "0" -3 … +5 V
Signal voltage "1" +11 … +30 V
Input current 6 mA at 24 V
DC
Sensor power supply U
S1
Branched off from the control voltage U
S
,
max. 0.5 A in total, short-circuit proof
Housing data
Dimensions W x H x D 30 mm x 126 mm x 26.5 mm (without connectors)
Weight approx. 165 g
Installation position variable
Material PA6 (polyamide)
Environmental conditions
Ambient temperature during operation -25 … +60 °C
-25 … +55 °C according to cULus
Ambient temperature during storage -40 … +85 °C
Vibration resistance, shock resistance conforms to EN 60068-2-6 / EN 60068-2-27
Technical data [
}
50]
EMC immunity / emission conforms to EN 61000-6-2 / EN 61000-6-4
Protection class IP65, IP66, IP67 (conforms to EN 60529)
Approvals / markings
Approvals / markings
*)
CE, cULus [
}
68]
*) Real applicable approvals/markings see type plate on the side (product marking).