manualshive.com logo in svg

Beckhoff EPI3 Series, Documentation

Share
Download
Beckhoff EPI3 Series Documentation Download Page 38

Commissioning/configuration of IO-Link master/device

EPI3xxx, ERI3xxx

38

Version: 1.2

Device selection based on revision, compatibility

The ESI description also defines the process image, the communication type between master and
slave/device and the device functions, if applicable. The physical device (firmware, if available) has
to support the communication queries/settings of the master. This is backward compatible, i.e.
newer devices (higher revision) should be supported if the EtherCAT master addresses them as an
older revision. The following compatibility rule of thumb is to be assumed for Beckhoff EtherCAT
Terminals/Boxes:

device revision in the system >= device revision in the configuration

This also enables subsequent replacement of devices without changing the configuration (different
specifications are possible for drives). Example: If an EL2521-0025-

1018

 is specified in the configu-

ration, an EL2521-0025-

1019

 or higher (-

1020

, -

1021

) can be used in practice.

If current ESI descriptions are available in the TwinCAT system, the last revision offered in the se-
lection dialog matches the Beckhoff state of production. It is recommended to use the last device re-
vision when creating a new configuration, if current Beckhoff devices are used in the real applica-
tion. Older revisions should only be used if older devices from stock are to be used in the applica-
tion.

Fig. 39: correction dialog with modifications

Once all modifications have been saved or accepted, click “OK” to transfer them to the real *.tsm
configuration.

5.1.3

Configuration via TwinCAT - explanation tabs

In the left-hand window of the TwinCAT System Manager, click on the IO-Link Box branch you wish to
configure.

Summary of Contents for EPI3 Series



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands