manualshive.com logo in svg

Beckhoff EPI3 Series, Documentation

Share
Download
Beckhoff EPI3 Series Documentation Download Page 33

Commissioning/configuration of IO-Link master/device

EPI3xxx, ERI3xxx

33

Version: 1.2

Fig. 29: Update Device Descriptions

The following conditions must be met before a configuration can be set up:

• the real EtherCAT and IO-Link hardware (devices, couplers, drives) must be present and installed

• the master/devices must be connected via EtherCAT cables and IO-Link cables in the same way as

they are intended to be used later

• the devices/modules be connected to the power supply and ready for communication

• TwinCAT must be in CONFIG mode on the target system.

The online scan process consists of:

• detecting the EtherCAT device (Ethernet Port at the IPC)

• detecting the connected EtherCAT devices. This step can be carried out independent of the preceding

step.

• troubleshooting

The scan with existing configuration can also be carried out for comparison.

Detecting/scanning of the EtherCAT device

The online device search can be used if the TwinCAT system is in CONFIG mode (blue TwinCAT icon or
blue indication in the System Manager).

Fig. 30: TwinCAT CONFIG mode display

Summary of Contents for EPI3 Series



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands