Beckhoff EPI3 Series Documentation Download Page 24

Page: 24 / 98

Mounting and connection

EPI3xxx, ERI3xxx

Version: 1.2

4.5

UL Requirements

The installation of UL-certified IP67 Box modules must meet the following requirements.

Supply voltage

CAUTION

CAUTION!

• from an isolated source protected by a fuse of max. 4 A (according to UL248) or

• from a voltage supply complying with

NEC class 2

voltage source must not be connected in series or parallel with another

NEC class 2

voltage source!

CAUTION

CAUTION!

In order to comply with UL requirements, the IP67 Box modules must not be connected to unlimited voltage
sources!

Networks

CAUTION

CAUTION!

In order to comply with UL requirements, the IP67 Box modules must not be connected to telecommunica-
tions networks!

Ambient temperature

CAUTION

CAUTION!

In order to comply with UL requirements, the IP67 Box modules must only be operated in an ambient tem-
perature range between 0 and 55 °C!

Marking for UL

All UL (Underwriters Laboratories) certified IP67 Box modules have the following markings.

Fig. 19: UL marking

Summary of Contents for EPI3 Series



































































































Search results

Summary of Contents for EPI3 Series

Reviews:

Brands by name

Popular brands

Beckhoff EPI3 Series, Documentation

Search results

Summary of Contents for EPI3 Series

Reviews:

Brands by name

Popular brands