Beckhoff EP9300-0022, Manual

Page: 26 / 67

Commissioning and configuration
EP9300-0022 26 Version: 2.3
5 Commissioning and configuration
5.1 IP address
The EP9300-0022 has no predefined IP address. The IP address can be assigned by one of the following
network devices:
• Profinet controller (normal case)
• DHCP server
On rotary switch S1, set the network device that should assign the IP address:
Fig. 13: Rotary switch S1
S1 Source of the IP address
1 DHCP server
3 Profinet controller
5.2 Profinet name
The Profinet name of the EP9300-0022 is "EP9300-xxx". "xxx" is a decimal number between 1 and 255,
which you can set via the rotary switches S2 and S3. The rotary switches are hexadecimally coded:
• S2 sets the higher-value nibble.
• S3 sets the lower-value nibble.
Fig. 14: Rotary switches S2 and S3
S2 S3 Profinet name
0 1 EP9300-001
0 2 EP9300-002
0 3 EP9300-003
… … …
1 0 EP9300-016
… … …
F F EP9300-255