Commissioning and configuration
EP9300-0022
31
Version: 2.3
Example configuration with EPxxxx EtherCAT Box
Fig. 17: Sample configuration with EPxxxx EtherCAT Box
Example configuration with EK1122 2-port EtherCAT junction
The counting direction is to be observed when using an EK1122. If EtherCAT junction 1 on the EK1122 is
connected, then the EtherCAT frame is forwarded here first (1); if junction 1 is not connected the frame on
junction 2 is sent (2), only after that does the sequence continue with the E-bus on the right-hand side (3).
Fig. 18: Sample configuration with EK1122 2-port EtherCAT junction
If both junctions are not used, then junction 1 and 2 are short-circuited as it were and the EtherCAT frame
continues directly from the terminal to the right.
Note that in the PROFINET controller the modules are entered in the direction of the EtherCAT frame.
Example configuration with EP1122 2-port EtherCAT junction
The counting direction is to be observed when using an EP1122; it is comparable with the EK1122. If
EtherCAT junction 1 on the EP1122 is connected, then the EtherCAT frame is forwarded here first (1); if
junction 1 is not connected the frame on junction 2 is sent (2), only after that does the sequence continue
with the EC-bus on the right-hand side (3).
Summary of Contents for EP9300-0022
Page 1: ...Documentation EN EP9300 0022 PROFINET RT EtherCAT Box 2022 03 31 Version 2 3...
Page 2: ......
Page 66: ......
