Beckhoff EL47 Series Documentation Download Page 37

Page: 37 / 178

Mounting and wiring

EL47xx

Version: 2.7

4.9

ATEX Documentation

Notes about operation of the Beckhoff terminal systems in potentially explosive ar-
eas (ATEX)

Pay also attention to the continuative documentation

Notes about operation of the Beckhoff terminal systems in potentially explosive areas (ATEX)

that is available in the download area of the Beckhoff homepage

http:\\www.beckhoff.com

4.10

UL notice

Application

Beckhoff EtherCAT modules are intended for use with Beckhoff’s UL Listed EtherCAT Sys-
tem only.

Examination

For cULus examination, the Beckhoff I/O System has only been investigated for risk of fire
and electrical shock (in accordance with UL508 and CSA C22.2 No. 142).

For devices with Ethernet connectors

Not for connection to telecommunication circuits.

Basic principles

UL certification according to UL508. Devices with this kind of certification are marked by this sign:

Summary of Contents for EL47 Series



















































































































































































Search results

Summary of Contents for EL47 Series

Reviews:

Related manuals for EL47 Series

Brands by name

Popular brands

Beckhoff EL47 Series, Documentation

Search results

Summary of Contents for EL47 Series

Reviews:

Related manuals for EL47 Series

Brands by name

Popular brands