Commissioning
EL125x, EL2258
287
Version: 2.5
Fig. 171: Opening the *. tnzip archive
• Select the .tnzip file (sample program).
• A further selection window opens. Select the destination directory for storing the project.
• For a description of the general PLC commissioning procedure and starting the program please refer to
the terminal documentation or the EtherCAT system documentation.
• The EtherCAT device of the example should usually be declared your present system. After selection
of the EtherCAT device in the “Solutionexplorer” select the “Adapter” tab and click on “Search...”:
Fig. 172: Search of the existing HW configuration for the EtherCAT configuration of the example
Also see more hints in section:
Commissioning, TwinCAT Quickstart, TwinCAT 3, Startup [
}
60]
.
6.9.1
Example program for EL2258: Multi-Timestamp
The following example program delivers 4 x 10 Switching-Tasks within one PLC-Taskcycle to the first four
channels of the terminal EL2258 and also sets the respective output states inverting from „1“ to „0“,
beginning with „1“ as for the first state.
The arbitrariness, for the first four channels respective different fixed switch times are illustrated by the
following oscilloscope recording:
