Beckhoff CP39 Series, Manual

Page: 17 / 52

Product overview
CP39xx 17 Version: 3.1
On an Industrial PC with PCIe module, CP-Link 4 is available as a Two Cable Display Link. The Control
Panel can be connected directly to the Industrial PC via the module. USB 2.0 (100 Mbit/s) and DVI are
transmitted together via a CP-Link 4 cable. An additional power supply is required for the CP39xx-0010 (see
Fig. 13).
24 V 24 V
CAT.6
A
(100 m)
C6032 mit CP-Link 4 Modul
CP29xx-0010
CP39xx-0010
C6032 with CP-Link 4 module
Fig. 13: CP39xx-0010_CP-Link 4
CP-Link 4 with transmitter box
If the Industrial PC is not equipped with a PCIe module, a transmitter box is required for connecting a
CP39xx-0010. The transmitter boxes CU8802 (Two Cable Display Link) and CU8803 (One Cable Display
Link) are available for this purpose.
When installing the CP39xx-0010 with the CU8802 transmitter box, the Industrial PC is connected to the
transmitter box via USB and DP/DVI. The transmitter box is then connected to the Control Panel via the CP-
Link 4 connection of the transmitter box using a CP-Link 4 cable. USB and DVI are transmitted together via
this cable. An additional power supply is required for the CP39xx-0010 (Two Cable Display Link). Fig. 14
shows the wiring with the CU8802.
0000 CU8802-0000
CP-Link 4 (100 m)
CP-Link 4 (100 m)
CP-Link 4 (100 m)
C6032-00x0
with PCIe compact module
for CP-Link 4
DP to DVI
DP to DVI
Fig. 14: CP39xx-0010_CP-Link 4, CU8802
When installing the CP39xx-0010 with the CU8803 transmitter box, the Industrial PC is likewise connected to
the transmitter box via USB and DP/DVI. The transmitter box is then connected to the Control Panel via the
CP-Link 4 connection of the transmitter box using a CP-Link 4 cable. With this box, USB, DP/DVI and power
supply can be transmitted together via the cable (One Cable Display Link). No additional power supply is
required for the CP39xx-0010. Fig. 15 shows the wiring with the CU8803.