Beckhoff CP39 Series, Manual

Page: 39 / 52

Decommissioning
CP39xx 39 Version: 3.1
Fig. 30: CP39xx-0000_cable ties on strain relief plate
In the case of the CP39xx-0000 and CP39xx-0010, release all cables from the strain relief rail by following
the steps below as shown in fig. 27:
1. Sever the cable ties.
2. Loosen the Torx TX20 screw of the strain relief rail (section A).
3. Rotate the strain relief rail by 180° to the left (section B).
B A
Fig. 31: CP39xx_releasing the strain relief rail
Disconnect the power supply
Proceed as follows to disconnect the power supply:
1. Disconnect the Control Panel from the external 24 V power supply.
2. Loosen the screw connection between the voltage socket and the voltage connector.
3. Remove the voltage connector from the voltage socket.
Disconnecting cables