Commissioning
CP39xx-14xx-0010
29
Version: 1.1
8. Use the M5 screws provided to fasten the mounting arm adapter to the tilt adapter. A tightening torque of
4 Nm is recommended (section H).
9. Connect the cables coming out of the side to the Control Panel (section I).
H
I
Fig. 23: CP39xx-14xx-0010_installation of mounting arm adapter with tilt adapter
10. Screw the side covers back onto the mounting arm adapter. A tightening torque of 1 Nm is
recommended (section J).
J
Fig. 24: CP39xx-14xx-0010_installation of mounting arm adapter with tilt adapter
ð
You have successfully fitted the mounting arm adapter and the tilt adapter to the Control Panel.
