Commissioning
CP39xx-14xx-0010
27
Version: 1.1
Fitting the mounting arm adapter without tilt adapter C9900-M764
To fasten the mounting arm adapter to the Control Panel, follow the steps below, shown in Figs. 18 & 19:
1. Release the four M4 screws of the two side covers (section A).
2. Slide the C9900-M759 adapter onto the C9900-M735 tube adapter and feed the cables out the side of
the mounting arm adapter (section B).
3. Grease the set screw with the PTFE paste supplied (section C).
A
B
C
D
E
F
G
H
Fig. 18: CP39xx-14xx-0010_mounting arm adapter installation
4. Use the bolt plates provided for temporary mounting (section D).
5. Use the M5 screws provided to fasten the mounting arm adapter to the Control Panel. A tightening
torque of 4 Nm is recommended (section E).
6. Connect the cables coming out of the side to the Control Panel (section F).
7. Screw the side covers back onto the mounting arm adapter. A tightening torque of 1 Nm is
recommended (section G).
D
E
F
G
Fig. 19: CP39xx-14xx-0010_mounting arm adapter installation
ð
You have successfully installed the mounting arm adapter on the Control Panel.
